DIY Nautical Beach photo board

My friend asked me to design her something "beachy" to hang above her closet doors. 

This is what I came up with by using an old photo, photoshop, a $7 pine board, some white acrylic paint and $6 worth of cleats (3 total) purchased at The Bass Pro Shop, decoupage glue ( I used Modge Podge glossy), and photo hangers for the back $2.  

Total piece measures 9 1/16 inches tall and 62 1/2" inches long.  

Instructions:
First you have to buy your board and cut it to whatever size you are wanting.  Then "whitewash" the edges by using a thin, watery layer of white acrylic paint.  Only brush paint around the front sides of the board and then around all four edges as to not use unnecessary paint on the surface of the wood that will not be showing.  You will want the paint thin enough that some of the wood grain shows through. 

Next create your picture to go on the front.  You will need one that will look good cropped into a long narrow strip like this.  I chose this old beach photo (original, uncropped photo above) I purchased from an auction. 

In photoshop, (or another photo program) crop your photo a few inches smaller than the size of your board.  I cropped mine to 8 inches tall and 59 inches long.  Next find a font you like and add your lettering in a large size.  (Mine was 472 pt large, University High font and I chose a turquoise blue for the color) I wrote "Seas the Day".

Once all of this is done you will need to flatten your image in photoshop.  Then Save As and name it something to keep this banner style photo in case you mess up and have to start all over (like I did-only I didn't originally save it and had to start from square one!!) 

For your next step you will need to crop again so that you can print on 8 1/2" x 11 size copy paper with your printer.  Select crop and change your dimensions to 11" width (to get as much on a page as you can) and then the height will be whatever size your making so mine was 8 inches.  (Be sure and save each page with a new name so if you mess one page up you can reprint it & easily start fresh even if your on middle page or at the end during your decoupage phase) There is a grid you can use in PS but I just eye balled it since I could overlap if necessary when I decoupaged my photos to the board.  I ended up with 6 pages that I had to trim with a paper cutter and then mount to the board. 

Once pages are printed and trimmed arrange in order of placement and start with the 1st page.  Decoupage the back of the page AND decoupage the part of the board where it will be placed.  Now smooth it down to the board carefully to avoid rips or tears.  Copy paper is very thin and will tear easily with too much wiping.  A few small wrinkles will be okay, especially if your using a vintage photo like mine.  Do each page and allow to dry.  Then decoupage the entire front of the board to get a good smooth coat over all your picture. 

After it is dry it is time to add cleats or whatever you choose to use as decorative hangers.  I decided on 3 stainless steel cleats to give a more nautical appearance.  I measured my board, divided it in 2 and placed the middle cleat first so it would be centered.  (Since that spot was the middle of my letter "e" I decided to turn it horizontal and leave the other 2 vertical and I like that look much better than all three going the same direction)  I added the other 2 equal inches from the center to space them all apart equally.  I screwed them in, added some picture frame hangers to the back of the board (not pictured) and whalaaa, it's done! 

Very little cost and very little time involved, my favorite kind of projects!

Myrtle Beach, South Carolina

I just returned from the Southeast Veterinary Conference in Myrtle Beach, South Carolina. It's a great continuing education for technicians, veterinarians, and practice managers. Of course part of the reason it is so wonderful is that it is right on the beach. Myrtle Beach is absolutely one of the best beaches I have ever been too. I love how the sand just gradually dips out into the Atlantic Ocean, no drop offs. It's not white sand and the water is not turquoise but it's all still very beautiful and calming. I didn't get to "vacation" as much as I would of liked since I was there on CE but I did learn some great things at CE and I got to do what I love (taking pictures) just not as much as usual. I only came home with under 400 shots. Usually, in a vacation situation I'll take 1000's. :) Here are a few of my favorites and I also took a couple that can be used in Photoshop for textures. Feel free to snag the texture photos at the end if you would like to use them in your own work. The other photos that are not labeled textures belong to me so please do not copy them. Enjoy!

I love the trees in South Carolina!  I didn’t get any of the Magnolia trees which are HUGE and so beautiful.  They were in bloom too- I could kick myself for not getting any pictures of them!!  The mossy oaks are beautiful and enchanting.  Check out our picnic site at the state park. 
A campground at Apache Pier.
The goat is just one of many from the carousel at Broadway at the Beach.         Apache Pier
 Springmaid Pier

Lightening from our balcony at the Sea Mist Resort. 
 Murrells Inlet
The waves & a sunset.
  Family moment for someone…I wish my little dog Valentine could of came.  She has never seen the ocean.  I would of loved for the rest of my family to be there too.  Even my wicked, crazy sisters Debbie & Shannon. :)  (this photo is for you two!)
Photos for textures in  Photoshop: